The MOBISCREEN MS 1202 and MS 1203 are available with two or three screen decks and have screening surface areas of 12 m² in the upper and middle deck and 11 m² in the lower deck. They thus make hourly outputs of up to 750 tons possible. But what else does it come down to with such screening plants apart from a high maximum output? Aiko Fischer, Product Manager for screening plants at Kleemann, answers this: "To achieve these high outputs, the material flow must be well designed. Kleemann has thus generously dimensioned the feed hopper with a holding volume of 10 m³. This makes feeding both with a crushing plant as well as with a large wheel loader possible. Despite discontinuous feeding by the wheel loader, the large hopper volume ensures continuous material supply to the screen. Correspondingly wide feeding and discharge conveyors guarantee an unobstructed material flow over the screen. The high-torque diesel engine also ensures that the plant does not 'run out of steam'."

"Apart from the pure performance data, we should not forget the most important thing: the adjustability of screening angle and amplitude to the different feed materials and their properties. Besides the selection of the suitable screen surface, the correct selection of these parameters ultimately decides the screening performance and product quality", continues Fischer.

Both screens can be combined very well both with the crushing plants from the Kleemann EVO series as well as the PRO series. Fischer: "The smaller the separating cut and the higher the required final product quality, the larger the screening surface must be. It's really quite simple."